Inv#

Short Description

Full Description

Price

# on hand

29296

Aero-Motive Balancer RB2 

Aero-Motive Balancer, Model RB2. Capacity: .00-2.0 LBS, .00-.9 KG. Hook Travel: 5.2 FT. Comes with original paperwork.
New In Box
G43

$39.99

 3

29295

Shrink Wrap Heating Element

NEW Shrink Wrap Heating Element.
I think there are 3 Side plates in this item and 4 F83. I'm not sure on the description of these items. What you see is what you get! There are no more identifying marks on them.
If you need more pictures, just email me!

$59.99

This is used but appears to be in good shape.

The R-5007 is for argon, helium, C-25, and nitrogen. 

The Output to flowmeter is regulated to exactly 50 psig. It has a rotating scale for easy readability of flow rates. CGA Outlet Connection 5/8 in. - 18RH female. 

Calibrated Flow Range CFH 20 to 220 He. 

NINE BOXES of 12 crayons! That is a total of 108 Yellow Lumber Crayons!

Dyke-Type (MCD)

All jaws are secured in the housing by a shouldered pivot screw with recessed hex head and can be reversed to facilitate right or left handed use. Jaw sets are removable for repeated re-sharpening .

MCD-1

Max. Soft Wire 0.03" (0.76 mm)

Semi-Flush Rise 0.007" (0.1 mm)

Angle 15°

Length of Cut 0.43" (10.92 mm)

Max. Tip Opening 0.15" (3.81 mm)

These jaws are for cutting wires flush or semi-flush. All jaws are secured in the housing by a shouldered pivot-screw with recessed hex head and can be reversed to facilitate right or left handed use. They may be factory re-sharpened for extended life and lower production costs.

SIX BOXES of 12 crayons! That is a total of 72 Red Lumber Crayons!

Dyke-Type

All jaws are secured in the housing by a shouldered pivot screw with recessed hex head and can be reversed to facilitate right or left handed use. Jaw sets are removable for repeated re-sharpening .

CD-1

Max. Wire 0.05" (1.2 mm)

Semi-Flush Cut-CD-3 .007" (0.18 mm)

Flush Cut-CD-31 .007" (0.18 mm)

Angle 15°

Length of Cut 0.83" (21 mm)

Max. Tip Opening 0.30" (7.63 mm)

These jaws are for cutting wires flush or semi-flush. All jaws are secured in the housing by a shouldered pivot-screw with recessed hex head and can be reversed to facilitate right or left handed use. They may be factory re-sharpened for extended life and lower production costs.

Dyke-Type (MCD)

All jaws are secured in the housing by a shouldered pivot screw with recessed hex head and can be reversed to facilitate right or left handed use. Jaw sets are removable for repeated re-sharpening .

MCD-1

Max. Soft Wire 0.03" (0.76 mm)

Semi-Flush Rise 0.007" (0.1 mm)

Angle 15°

Length of Cut 0.43" (10.92 mm)

Max. Tip Opening 0.15" (3.81 mm)

These jaws are for cutting wires flush or semi-flush. All jaws are secured in the housing by a shouldered pivot-screw with recessed hex head and can be reversed to facilitate right or left handed use. They may be factory re-sharpened for extended life and lower production costs.

These are NEW!

This is new in the box!

The old number was VAX25 and the New number is VNX25. 

These are all NEW.

These are all NEW.

These are all NEW.

These are all NEW.

The old number was VBX18 and the New number is VRX18. 

These are all NEW.

One is VXX250 & the other one is VJB18 2022.

These are all NEW.

10 BOXES of 12 crayons! That is a total of 120 Black Lumber Crayons!

These are NEW!

 I opened the box on one of these for the picture. The other one was not in a box.

This is for a Centro Matic Grease Pump. 

It is shiny and NEW.

This was an active take out. It is a transducerized pulse tool controller. 

This is used but appears to be in good shape.

There is a storage area on the front of this that is cracked.  

This case is EMPTY and is sold AS IS. 

This appears to be new, but has some surface rust from shelf life. It has 10 carbide teeth.

These are both New in tubes.

TWO parts for a Rapid Air J Series Punch Press Feed . Included in this are the following:

* 25000001 Actuating Valve Assembly

* 35900005 Actuating Valve Cap

 These are all New.

· Circular Saw Blade

· Blade Diameter 12 Inches

· Arbor Size 1 Inch

· Number of Teeth 80

· Plate Thickness 0.087 Inch

· Kerf 0.126

· Hook Angle -5 Degrees

· Tooth Grind TCG

· Blade Non Ferrous Metals

· Carbide Teeth

· Woodworking

This appears to be new, but has some surface rust from shelf life.

You get 6 Cut-off wheels(these are in an Ingersoll-Rand bag with part no. SPA102RX-STA written on it - I think that is the number written on it), 1 Mauren 60AXL (approx. 3 7/8 diameter), 2 other parts with no number. 

What you see is what you get.

BOX OF NEW TITAC T-12 PLASTSTIFT PLASTIC PINS.  

These are 12 mm (3/8”) 1500 per box.

Bend-EZE Model BP-1 by Simonds. With Air-Val Cat. No. 103 by Simonds. 

This is a hand operated Power Pack with foot switch. The Bend-EZE has a sticker on it that says Quill Housing 4-HG-20.

For more information visit:

http://www.simonds-inc.com/catalogdl/PDF/

Electronics%20Brochure_2004.pdf

701 Test Kit for Static Control Surfaces, by 3M.  It may be used, I’m not sure, but it looks NEW.  It has a 701 Megohmmeter.  This retails for $798.25.

New in Plastic

Clean Up Those Spills!!!

29090

Radial Tire Chains

Radial Tire Chains. Had them for Ford Explorer. Will fit many different sizes of tires. Never used

New

$30

1