Inv#
Short Description
Full Description
Price
# on hand
7047
Bimba Flat-1 Pneumatic Cylinder FO-701-3R
Bimba Flat-1 Pneumatic Cylinder, part # FO-701-3R. Double Acting, Single End Rod. Threaded Mounting Holes - Rear. Approximate Bore Size: 1/2". I am unsure about the stroke on this cylinder.
New In Box
J48
$99.99
7046
Festo Pneumatic Cylinder DNG-63-300-PPV-A
Festo Pneumatic Cylinder, part # DNG-63-300-PPV-A. Cylinder also had the following written on it: 21084648; 000010; 30003 PN 41; Pmax = 10BAR/145PSI.
Like New
M111.4
$199.99
2
No Picture
These measurements are the best to my ability. This product is in good condition.
This product is in good condition.
This product is in good condition.
This product is in good condition.
This product is used and is in good condition.
This product is in good condition.
Lot 5.
This was used in a printed Circuit Board Manufacturing company, but has many other uses. These measurements are the best to my ability.
This product is in good condition.
Lot 4.
This was used in a printed Circuit Board Manufacturing company, but has many other uses. These measurements are the best to my ability.
This product is in good condition.
Lot 3 and 3A.
This product is in excellent condition.
This product is new but missing the original package.
This product is new and still sealed in the plastic bag.
This product is new and still in the sealed plastic bag.
For the new one you would need to order reed switches seperately. They are part number P8S-GRSHX. And the Cable is part number 0866207005.
This product is new but missing the original package.
This product is used and is in good condition.
This product is new old stock and is in good condition.
This product is new.
This product is new.
I think the stroke is 3/4".
The square part is 1-1/2" x 1-1/2".
I think it is used, but appears to be in good condition.
I think the stroke is 1".
This one is Big! I think it is used, but appears to be in good condition.
I think the stroke is 1".
This one is Really Big! I think it is used, but appears to be in good condition.
I think the stroke is 2". It is used, but appears to be in good condition.
They are used, but appears to be in good condition.
Some appear new some appear used, all appear to be in good condition.
FCP Series Port-Mounted Flow Controls Line
General Specifications:
- Banjo Connector: Chrome Plated Zinc Die Cast
- Banjo Retaining Ring: Zinc plated steel
- Stem: High-Strength Anodized Aluminum Alloy
- Adjusting Needle: Stainless Steel
- "O" Rings and Lip Seal: Buna N
- Maximum Operating Pressure: 150 PSI air only
- Operating Temperature Range: -20° to 200°F (-25° to +90°C)
I think the stroke is 1".
These are used, but appear to be in good condition.
You get one MRS-022-D 2" Stroke and one MRS-023-D 3" Stroke cylinder.
These are used but appear to be in good shape.
You get one MRS-041-DZ 1" Stroke and one MRS-041-D 1" Stroke cylinder. The MRS-041-D has the square 'base' plate on it and a 'punch' on the end.
I don't know a lot about these. These are used but appear to be in good shape.
You get one 043-D 3" Stroke and one 044-D 4" Stroke cylinder.
These are used but appear to be in good shape.
You get two 012.5 2-1/2" Stroke cylinders.
These are used but appear to be in good shape.
You get TWO 010.5 Cylinders 1/2" Stroke.
These are used but appear to be in good shape.
You get one MRS-021-D 1" stroke and one MRS-021-DXDE double end 1" stroke.
These are both used but appear to be in good shape.
You get two 011.5-R cylinders 1-1/2" stroke.
These are both used but appear to be in good shape. They are both shiny and clean.
You get two 041-D cylinders 1" stroke.
One of these looks new. It shows no signs of use. These both appear to be in good shape.
This appears to be new. It shows no signs of use.
This is used, but appears to be in good condition.
This is a double ended, position sensing cylinder. I think the stroke is 1".
This is NEW in the plastic!
This is a double ended cylinder. I think the stroke is 1-1/2". The square part is 2" x 2".
I think it is used, but appears to be in good condition.
This appears to be new. It shows no signs of use. It is not in a sealed bag.
This is not in a sealed bag.
One is new but it is not in a sealed bag. The other one appears new, but the threads look like they have been screwed in before.
Both of these are new. One is in a sealed bag and one is not in a sealed bag.
You get two HNSA10 cylinders 1/2" stroke.
These both appear to be in good shape.
This is new but it is not in a sealed bag.
This appears to be new but it is not in a sealed bag.
This is new, but it is not in a bag..
Compact Air Pneumatic Round Cylinder AR118X112.
This is used but appears to be in good shape.
$29.99
7000
EMAIL ME FOR MORE INFO
